Reliability Testing of 3D-Printed Electromechanical Scanning Devices

Basit Öğe Kaydı
dc.authoridYelten, Mustafa/0000-0001-7482-0536|Ferhanoglu, Onur/0000-0002-5381-533X|Gökdel, Yiğit Dağhan/0000-0003-4634-4733|Gonultas, Burak M/0000-0002-7966-7929
dc.authorwosidYelten, Mustafa/P-3247-2018
dc.authorwosidFerhanoglu, Onur/I-9348-2014
dc.authorwosidGökdel, Yiğit Dağhan/AAO-4840-2020
dc.authorwosidGonultas, Burak M/AAE-4731-2022
dc.contributor.authorGonultas, B. Mert
dc.contributor.authorSavas, Janset
dc.contributor.authorKhayatzadeh, Ramin
dc.contributor.authorAygun, Sacid
dc.contributor.authorCivitci, Fehmi
dc.contributor.authorGokdel, Y. Daghan
dc.contributor.authorBerke Yelten, M.
dc.date.accessioned2024-07-18T20:42:13Z
dc.date.available2024-07-18T20:42:13Z
dc.date.issued2018
dc.departmentİstanbul Bilgi Üniversitesien_US
dc.description.abstractRecent advances in the field of stereolithography based manufacturing, have led to a number of 3D-printed sensor and actuator devices, as a cost-effective and low fabrication complexity alternative to micro-electro-mechanical counterparts. Yet the reliability of such 3D-printed dynamic structures have yet to be explored. Here we perform reliability tests and analysis of a selected 3D-printed actuator, namely an electromechanical scanner. The scanner is targeted towards scanning incoming light onto the target, which is particularly useful for barcoding, display, and opto-medical tissue imaging applications. We monitor the deviations in the fundamental mechanical resonance, scan-line, and the quality factor on a number of scanners having different device thicknesses, for a total duration of 5 days (corresponding to 20-80 million cycles, depending on the device operating frequency). A total of 9 scanning devices, having 10 mm x 10 mm die size were tested, with a highlight on device-device variability, as well as the effect of device thickness itself. An average standard deviation of < similar to%10 (with respect to the mean) was observed for all tested parameters among scanners of the same type (an indicator device to device variability), while an average standard deviation of less than about 10 percent (with respect to the mean) was observed for all parameters for the duration of the entire test (as an indicator of device reliability), for a total optical scan angle of 5 degrees.en_US
dc.identifier.doi10.1007/s10836-018-5722-0
dc.identifier.endpage370en_US
dc.identifier.issn0923-8174
dc.identifier.issn1573-0727
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85044472130en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage363en_US
dc.identifier.urihttps://doi.org/10.1007/s10836-018-5722-0
dc.identifier.urihttps://hdl.handle.net/11411/7180
dc.identifier.volume34en_US
dc.identifier.wosWOS:000432738300014en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Electronic Testing-Theory and Applicationsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject3d Printed Optomechanicsen_US
dc.subjectMicroscanneren_US
dc.subjectSensors And Actuatorsen_US
dc.subjectReliabilityen_US
dc.subjectVariabilityen_US
dc.subjectScannersen_US
dc.titleReliability Testing of 3D-Printed Electromechanical Scanning Devicesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Web of Science Indexed Publications
Scopus Indexed Publications